CEPS Series

CEPS Series

Electronic amplifier plug-in version for single solenoid proportional control valves.

The electronic amplifier Plug version was designed in compliance with EN 175301-803 (ex DIN43650), for direct mounting on the valve solenoid.
The CEP.S can used with proportional valves XD.*.A…, XDP.*.A…, XP.3…, XQP.*…, CXQ.3.. .

The output stage operates on the pulse width modulation principle (P.W.M.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal.

Gain, minimum current and rise and fall ramp time adjustments are possible through the corresponding potentiometers fitted on top side of the card, and can be accessed by slackening the relative screw and opening the cover of the connector. While the output current to the solenoid can be measured via the Valve Current test points.

SERIE 2, has the diode reverse polarity protection inside on the power line.

You may also be interested in:

Dana SAC UK (Head Office)

Dana SAC UK Ltd, Kestrel Court, Centre Park, Warrington, Cheshire, WA1 1QX
T: 01925 636682 / E: [email protected]

Gearbox Service Centre

Dana SAC UK Ltd, Exmoor Avenue, Skippingdale Ind Estate, Scunthorpe, North Lincs, DN15 8NJ
T: 01724 281868 / E: [email protected]