REMS Series

REMS Series

Electronic regulators for single solenoid proportional control valves.

The electronic control card type REM.S.RA has been designed to drive the “XD.*.A, XDP.3.A, XP.3, XQ.3, XQP.*. and CXQ.3” series single solenoid proportional valves without integral position transducer.

The control card is enclosed in an “OCTAL” type housing, a typical relay mounting standard.

The output stage operates on the pulse width modulation principle (P.W.M.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal.

Output short circuit and supply polarity inversion protection is provided.

Gain, minimum current and rise and fall ramp time adjustments are possible through the corresponding front panel trimming potentiometers, while the utput current to the solenoid can be measured via the Valve Current test points, and the ramp operation can be excluded.

The product incorporates a serial interface for adjustment of parameters.

You may also be interested in:


Dana SAC UK (Head Office)

Dana SAC UK Ltd, Kestrel Court, Centre Park, Warrington, Cheshire, WA1 1QX
T: 01925 636682 / E: [email protected]

Gearbox Service Centre

Dana SAC UK Ltd, Exmoor Avenue, Skippingdale Ind Estate, Scunthorpe, North Lincs, DN15 8NJ
T: 01724 281868 / E: [email protected]